AL8-2 – Programming manual
4189320003D
Page 18/19
DELAYED CANCELLATION OF INHIBIT FUNCTION (0..40 secs)
When the "INHIBIT" LED is lit (green), the LEDs 1-10 indicate the actual basic time for
delayed cancellation of the inhibit function.
If all LEDs 1-10 are red, the actual time delay is 0 sec.
If one of the LEDs is green, the actual basic time delay
corresponds to the figure to the left of the LED.
Press
FUNCTION SELECT
, until the requested basic time is
indicated.
Press
ENTER
to enter the basic time.
When the basic time has been entered, the "+10" and "+20" LEDs are lit, indicating the
additional time as follows:
NOTE:
Both LEDs are lit simultaneously.
EITHER: +10
RED
ADDITIONAL
TIME:
+20
RED
0
sec.
OR: +10
GREEN
ADDITIONAL
TIME:
+20
RED
10
secs.
OR: +10
RED
ADDITIONAL
TIME:
+20
GREEN
20
secs.
OR: +10
GREEN
ADDITIONAL
TIME:
+20
GREEN
30
secs.
Pressing FUNCTION SELECT causes a change from the actual indication/function for
additional time to the next in line.
So press
FUNCTION SELECT
, until the requested additional time is indicated and press
ENTER
to enter this into the programme memory.
