BATTERY RECHARGE
1.
Connect the power adapter with the radio.
2.
Press the Recharge button, the battery icon will blink for 5 seconds.
3.
Auto Charge : The charging function will start automatically and the batteries are fully charged.
Manual Charge : When the battery icon is blinking , you can press the no 1-9 to set the charging
time in hours.
TIME SETTING
Time Display
1.
Under the off mode, time will be displayed.
2.
Under the on mode, press the exit button to display the current time.
Time Set
1.
Press the Enter button twice to enter into the time set mode.
2.
Press the numeric buttons to enter the time e.g 15:03 , enter 1-5-0-3 buttons.
3.
The radio will then enter into the alarm set mode. Press Exit or wait for 6 seconds to return to time
set mode.
Note : Press the Exit button if you would like to cancel any wrong input.
12/24 Hour System Setting
1.
Remove the batteries and disconnect the power adapter.
2.
Install the batteries again after 1 minute, you will see the “SET” message.
3.
Press the Enter button twice, you will see the “12-24” message.
4.
Press 1 for 12 hours system or 2 for 24 hours system.
AM TUNING STEP
1.
Remove the batteries and disconnect the power adapter.
2.
After 40 seconds, install the batteries again and you will see the “SET” message.
3.
Press the Enter button once and you will see “9-10KHz message.
4.
Press 1 for 9K and 2 for 10K
POWER ON/OFF
On/Off
1.
Press the Power button to turn on the radio.
