background image

2.

 

Press the Power button again to turn off the radio. 

 

Turn On Sleep Function   

1.

 

(i)Under the off mode, press the Power button to turn on the radio, the radio will enter in the sleep 

mode of 99 minutes by default. You will see the sleep icon blinking. (ii)Under the on mode, long 

press the Exit button to turn on the sleep mode. 

2.

 

Press the Enter button , the “99” will change to “--“ . 

3.

 

Press the numeric buttons to set the sleep time from 1- 99 minutes.   

 

Turn Off Sleep Function 

1.

 

Press the Power button , the sleep function icon will blink. 

2.

 

Press the Exit key to turn off the sleep function or otherwise the radio will enter into sleep mode of 

99 minutes by default. 

 

Timer on/off 

Under 24 hours system , you can set three sets of timer on/off. 

 

1.

 

Under the off mode, press the Enter button to enter into setting mode. 

2.

 

Press any Timer button (1-3) , you will see timer icon blinking. 

3.

 

Enter the alarm time by the numeric buttons e.g 7:30 a.m. ,enter 7-3-0. 

4.

 

Enter the frequency eg. 95.8MHz , enter 9-5-8-0. 

5.

 

Set the volume through the tuning knob at the right side of the radio. 

6.

 

Set the sleep time. 

Note : The radio will then turn on at the preset time , station , volume and turn off in preset time. 

 

Alarm Time Checking   

Under the off mode, press the Timer button (1-3) to check the alarm time. 

 

Turn Off Timer   

Under the off mode, press the Timer button , you will see the icon blinking. Press the Exit button to 

turn off the timer function. 

 

Recall Last Timer Setting 

Press any one Timer button and then the Enter button to turn on the timer setting as per last operation. 

 

VOLUME CONTROL   

 

1.

 

Long press the Vol button until you see the VOL message. Adjust the volume (32 levels) with the 

Summary of Contents for DE1105








Reviews: