turning knob at the right side of the radio.
2.
Or long press the Vol button until the VOL message disappears. You can set the volume by the
volume tuning knob located on the top of the radio.
BAND SELECTION
Press the FM , MW , SW button to switch among FM , AM or SW bands.
METER BAND SELECTION
Under the SW band, press the SW button again to switch between different meter bands.
SEARCH STATION
1.
Manual Search – Press the Step button , then “+” or “-“ to locate the required station.
2.
Auto Search – Press the Step button , then long press “+” or “-“ to search the required station. The
searching process will end when the radio finds a station.
Direct Frequency Input
1.
Turn on the radio and select the band.
2.
Press Enter button.
3.
Enter the frequency by the numeric buttons e.g. 95.80MHz , enter 9-5-8-0 (You can have the
chance to switch to other band by pressing any band button before entering the frequency)
Wildcard Input
Press number 1 and then press the Enter button and you will get 100.00MHz
Tuning Knob
1.
Turn on the radio and select the band.
2.
Short press “Fast/Slow button” to select different tuning options. (Slow : FM-50K, AM-1K,
SW-1K, Fast : FM-100K, AM-9K/10K, SW-5K)
3.
Search the required station through the tuning knob.
Memory Recall
1.
Power on the radio, Short press “STEP” button and you will see “MEM” message.
2.
Short press “+” or “-“ to switch between different channels.
3.
You can also switch to the channel by pressing the numeric button, e.g channel 8 - enter 0-8 ,
channel 25 – enter 2-5 .
