-10-
143558 - PileDriver (26-June-2012)
SAFETY DECALS
1. Keep safety decals and signs clean and
legible at all times.
2. Replace safety decals and signs that are
missing or have become illegible.
3. Replaced parts that displayed a safety sign
should also display the current sign.
4. Safety decals or signs are available from your
Dealer Parts Department. Safety decals will
be available upon request.
How to Install Safety Decals:
• Be sure that the installation area is clean
and dry.
• Decide on the exact position before you
remove the backing paper.
• Remove the smallest portion of the split
backing paper.
• Align the decal over the specified area and
carefully press the small portion with the
exposed sticky backing in place.
• Slowly peel back the remaining paper and
carefully smooth the remaining portion of
the decal in place.
REPLACEMENT DECALS
Decals, especially safety and reflective, should be
replaced when they become damaged or worn.
Contact your dealer.
Safety Decals
143038
Mounting Decal
2
142546
Remove Jack Decal
2
142386
Warning Decal, Falling Blade
2
143240
Tow Cable Routing (Optional)
2
Reflective Decals
142556
Red Reflector, 9” lg
4
142557
Amber Reflector, 9” lg
2
Product Decals
143204
Degelman Logo, 48-3/16” lg
1
142009
Degelman Logo, 16-1/4” lg
1
142859
PileDriver Decal
1
Maintenance
PRE-ASSEMBLY - CENTER SECTION
Important:
Before attaching wing assemblies, it is
recommended to fully install all Tilt and Wing Angle
brackets to the back of the Center Section. It should be
noted that access to install center section components
may prove difficult with the cutting edge assembly
installed. The following is a recommend procedure for
installing these brackets:
Recommendation for Installing Center Options:
1. Lay center section down on its face, raised up
about 5” above ground.
2. Unbolt cutting edge assembly and let swing
away to gain better access to hardware.
3. Place wing angle, frame mount and/or tilt
assembly brackets down onto center section.
4. Fasten accordingly.
5. Swing cutting edge assembly back into place
and securely fasten.
