TREVIA | STORUS | VARIA | ROVIO
www.degardo.de
23
DE
GB
FR
Care and maintenance
Figures D to G - Changing a bulb
Warning! Overheating and risk of fire!
Only use energy saving lamps and LED bulbs.
(Refer to the “technical data” table
for the relevant power ratings.)
Changing the remote control batteries
Change the batteries when the operating light (F3) is permanently illuminated red. Follow these
steps to do this:
1. Open the battery compartment cover on the back of the remote control.
2. Replace the two batteries (micro AAA) in the battery compartment.
3. Slide the cover back on until it clicks into position.
4. To prevent incorrect operation after replacing the batteries, wait 3 seconds before using the
equipment again.
Selecting a colour change programme
Use the programme selection button F8 (M) to select the colour change programme. Adjust the
colour change speed by pressing button F9 (S-/S+).
No.
Programme mode list
No.
Programme mode list
1
Soft light increasing then dimming
all colours
6
Red light increasing then dimming,
followed by 3 flashes
2
Soft light increasing then dimming
white light
7
Green light increasing then dimming,
followed by 3 flashes
3
Soft light increasing then dimming
all colours except white
8
Blue light increasing then dimming,
followed by 3 flashes
4
Quick change between all colours
9
White light increasing then dimming,
followed by 3 flashes
5
Quick random colour change
all colours
Ensure the bulbs are handled correctly. Only use energy saving
lamps with a maximum power rating of 18W, otherwise there is a
risk of overheating!
