TREVIA | STORUS | VARIA | ROVIO
www.degardo.de
25
DE
GB
FR
Cleaning
Do not use cleaning agents containing solvents or kerosene!
The surface may be wiped with a damp cloth, with a thinned down domestic cleaner or
soapy water. For excellent results, use the DEGARDO
®
special cleaner in a practical
spray bottle. This cleaner is optimised for the materials and surfaces of DEGARDO
®
products.
DEGARDO
®
special cleaner - item number 227679
High-pressure cleaning
Especially stubborn dirt may be removed using a high-pressure cleaner. Set the equipment to a
pressure of 100 to 150 bar. Ensure a minimum distance of 30 centimetres between the nozzle and
the container. A high-pressure water spray with a spray angle of 25 degrees allows contamination to
be gently cleaned off. Do not use rotating point spray nozzles (dirtblaster nozzles).
Disposal
Dispose of the various components of the product in accordance with the relevant legal regulations
or send the components for recycling. Dispose of the bulbs and batteries properly as
required by law. Nationwide recycling centres and collection points are available for
disposing of bulbs, where the old bulbs will be accepted free of charge.
Figure G – Changing the bulb for VARIA
(Item No.: 231342, 244495)
1. Remove the plug from the socket to disconnect the equipment from the power supply.
2. Loosen the 4 screws (1) on the retainer (2) for the faulty bulb unit (4).
3. Carefully
pull out the retainer (2) with the faulty bulb (4). Take care - short cable length!
4. Unscrew the faulty bulb (4) from the socket (3).
5. Screw the new bulb (4) into the socket (3).
6. Insert the retainer (2) into the opening and retighten the 4 screws (4).
7. Replace the plug in the socket to reconnect the equipment to the power supply.
