TREVIA | STORUS | VARIA | ROVIO
www.degardo.de
21
DE
GB
FR
Notice:
The drill must be kept perpendicular to the surface being drilled through. Otherwise
irreparable damage may be caused.
Figure C – DEGARDO
®
planter insert and decorative insert
The planter inserts and decorative inserts make it easy to change the planting or use of the product
and allow easy access to change a bulb. Inserts are available as accessories.
Set-up (illuminated products)
The products are supplied ready for connection. Insert the power plug into the socket.
Operating products with LED RGB+CCT - Illumination with the remote control
Pairing and unpairing the remote control
The remote control is paired to the light in the factory. If the light does not respond to the remote
control, pairing must be carried out again. Follow these steps to do this:
1. Remove the plug from the socket for a short while then replace it.
2. Within 3 seconds, press one of the zone buttons POWER-ON (F10) 3 times in quick succession.
3. If pairing was successful, the light will flash green 3 times.
If the light does not flash, repeat the process.
If one light zone needs to be unpaired from the remote control, proceed as follows:
1. Remove the power plug from the socket for a short while then replace it.
2. Within 3 seconds, press the required zone button POWER-ON (F10) 5 times in quick
succession.
3. If unpairing the zone has been successful, the light will flash red 10 times.
Notice:
any number of lights can be operated using the remote control. A maximum of 4 zones can be
allocated to one remote control. Take care to ensure that the lights within any one zone are not more
than 10 metres apart.
TREVIA I
TREVIA II
TREVIA III
TREVIA IV
TREVIA V
Planter insert item no.
183915
183913
183911
193831
227627
Decorative insert item no. 227607
227610
227613
227616
227628
TREVIA 900K
STORUS V
VARIA
ROVIO III
ROVIO IV
Planter insert item no.
183909
227674
231343
205679
210784
Dekoeinsatz Art.-Nr.
227631
227675
231344
227638
227641
Figure C – Planter insert and decorative
