Page 20
Gas Jet Cleaning Procedure
x
Every six months the gas jets on your hob should be
cleaned to ensure continued efficient and safe
operation.
x
This may be done using a Gas Jet Cleaning Kit which
may be purchased from your nearest Defy Service
Centre.
x
The kit comprises of a sliding T-bar (A) a socket (B)
and a ‘Classic pin’ (C).
x
Fit the T-bar to the socket and remove the pot
stands, burner caps and burner bodies.
1.
Insert the socket into the central tube of the burner so
that it locates over the brass gas jet at the bottom of
the tube.
2.
Gently loosen the brass gas jet by turning the socket in
an anti-clockwise direction.
3.
Carefully lift the socket and loosened brass gas jet
from the central burner tube.
4.
Insert the Classic pin into central hole of the jet and
slide it up and down until the jet is free of accumulated
dirt.
5.
Re-assemble in reverse order.
6.
Clean all the burner jets in the manner described
above.
