Page 22
6. Troubleshooting
Oven emits steam when it is in use.
It is normal that steam
escapes during
operation
>>> This is not a fault.
The appliance emits metal noises while
heating and cooling.
When the metal parts
are heated, they may
expand and cause
noise.
>>> This is not a fault.
The appliance does not operate.
The mains distribution
board has tripped.
>>> Check the mains
distribution board for
tripped circuit breakers.
The appliance is not
plugged into the wall
socket.
>>> Check the plug
connection.
Buttons/knobs/keys on
the control panel do
not function.
>>> Keylock may be
enabled. Please
disable it. (See: Using
the keylock)
Oven light does not work.
Oven lamp is
defective.
>>> Replace oven
lamp.
Power is cut.
>>> Check if there is
power. Check the fuses
in the fuse box. If
necessary, replace or
reset the fuses.
Oven does not heat.
Function and/or
Temperature are not
set
>>> Set the function
and the temperature
with the Function and/
or Temperature knob/
key.
Power is cut.
>>> Check if there is
power. Check the fuses
in the fuse box. If
necessary, replace or
reset the fuses.
The wall switch is not
on.
>>> Check the wall
switch is on.
PLEASE REGISTER YOUR PRODUCT AT
www.defy.co.za
DEFY APPLIANCES (PTY) LTD
P.O.BOX 12004
JACOBS
DURBAN
4026
SOUTH AFRICA
DANGER:
Before replacing the
oven lamp, ensure that the
appliance is disconnected from
mains and cooled down to avoid
the risk of an electrical shock. Hot
surfaces may cause burns!
The oven lamp is a special
electric light bulb that can resist
up to 300°C. See Technical
specifications for details. Oven
lamps can be obtained from
Authorised Service Agents.
Position of lamp might vary from
the figure.
Replacing the oven light bulb
If your oven is equipped with a square lamp:
1.Disconnect the product from mains.
2.Remove the wire racks as described. See Cleaning
the oven.
Oven light
The oven light is switched on by the
multifunction
selector
switch and switches off when the knob is
returned to
0
.
3.Remove the protective glass cover with a
screwdriver.
4.Unscrew oven lamp and replace it with new one.
5.Install the glass cover and then the wire racks.
If your oven is equipped with a round lamp:
1.
Disconnect the product from mains.
2.
Turn the glass cover counter clockwise to
remove it.
3.
Remove the oven lamp by turning it counter
clockwise and replace it with the new one.
4.
Install the glass cover.
