Page 12
First cleaning of the appliance
Surfaces might get damaged by
some detergents or cleaning
materials. Do not use
aggressive detergents, cleaning
powders/creams or any sharp
objects during cleaning. Do not
use harsh abrasive cleaners or
sharp metal scrapers to clean
the oven door glass since they
can scratch the surface, which
may result in the glass
shattering.
1. Remove all packaging materials.
2. Wipe the surfaces of the appliance with a
damp cloth or sponge and dry with a
cloth.
Initial heating
Heat up the appliance for about 30 minutes
and then switch it off. Thus, any production
residues or layers will be burnt off and
removed.
WARNING
Hot surfaces cause burns!
The appliance may be hot when
it is in use. Never touch the
inner sections of the oven,
heaters etc. Keep children
away. Always use heat
resistant oven gloves when
placing or removing dishes into/
from the hot oven.
Electric oven
1.
Take all baking trays and the wire
shelves out of the oven.
2.
Close the oven door.
3.
Select Static position.
4.
Select the highest grill power; (See
section on how to operate the electric
oven).
5.
Operate the oven for about 30 minutes.
6.
Turn off your oven; (See section on
how to operate the electric oven).
Grill oven
1.
Take all baking trays and the wire
shelves out of the oven.
2.
Close the oven door.
While making any adjustment,
related symbols will flash on the
display.
Initial use
Time setting
x
Press +/- keys to set the time of the day
after the oven is energized for the first
time. Confirm the setting by touching
symbol and wait for 4 seconds without
touching any keys to confirm.
1
Adjustment key
2
Keylock symbol
3
Clock symbol
4
Alarm volume symbol
5
Eco mode symbol
6
Plus key
7
Minus key
8
Time pie symbol
9
Alarm symbol
10
End of Cooking Time
symbol
11
Cooking Time symbol
12
Program key
If the initial time is not set, clock
will run starting from 12:00 and
the clock symbol will be displayed.
The symbol will disappear once
the time is set.
Current time settings are
cancelled in case of power failure.
It needs to be readjusted.
