9
HOMEDEPOT.com
Please contact 1-866-308-3976 for further assistance.
feature selection
Mode of Operation
Mode Knob
adjustment
how to Set
Power Switch
auto Setting (motion activated)
Lights should turn ON with motion
only at night and should turn OFF
after 1-12 min. of no motion.
“Auto” MODE knob
arrow points to a time
selection within the
1m-12m time range.
Keep wall switch in ON position.
Keep the power to the fixture ON.
Dusk to Dawn Setting
(activated only at night)
Lights should turn ON for 6 hours at
dusk and then reset to Auto Setting.
MODE knob arrow points
to a time selection within
the 1m-12m time range.
Turn power OFF and ON twice
within 3 seconds; light will
go into override mode.
Test Setting
Lights should turn ON with motion
both day and night. Lights should turn
OFF after 4 seconds.
MODE knob arrow
points to TEST.
Wall Switch Setting
(connected to fixture)
Keep wall switch in ON position.
Return to auto Setting
(motion activated)
from any of the above settings.
“Auto” MODE knob
arrow points to a time
selection within the
1m-12m time range.
Turn the power OFF
for at least 90 seconds
and then back ON.
troubleshooting
Problem
Possible Cause
Solution
Light does not
come ON with
motion at night.
□
No power to the fixture.
□
Check if circuit breaker tripped.
□
Confirm wall switch is ON.
□
Surrounding external ambient
light is too bright. (If so, the
unit may think it is daytime.)
□
Re-aim the sensor head.
□
Relocate or reposition the unit away from
the light.
□
Wiring to the unit is loose.
TURn OFF POWER BEFORE COnTInUInG.
□
Check wiring and reconnect if necessary using
wire nuts (EE) provided.
Light comes on
for no apparent
reason at night.
□
There is motion in the
detection zone.
□
Make sure the sensor is not picking up moving
objects such as trees, traffic, etc.
TEST FOR yOURSElF:
□
Cover the sensor lens with cardboard to
prevent sensor from detecting motion. If the
light stays off, something in the detection
zone is triggering the sensor. If this is the
case, reduce the sensitivity.
□
If the light stays on with the sensor lens
covered, contact Customer Service.
□
Reposition the sensor.
□
Unit is in the motion
activated setting.
□
Make sure “Auto” MODE knob is set between
1m-12m.
