4
Before beginning assembly of product, make sure all
parts are present. Compare parts with package contents
list and hardware contents. If any part is missing
or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes
Note: Fixture should be installed by persons
with experience in household wiring or by a qualified
electrician. The electrical system and the method of
electrically connecting this fixture to it must be in
accordance with the National Electrical Code and
local building codes.
□
Install the motion sensor/transmitter 8–12 feet
above the ground. Motion sensor is less sensitive
above 12 feet.
□
Locate motion sensor so motion moves laterally or
towards the detection zone.
□
Locate sensor away from heat producing sources
to prevent false triggering. Also be very careful not
to include objects such as windows, white walls
and water in the detection zone.
□
Locate fixture away from moving objects such as
trees and street traffic.
□
Do not install more than one motion-activated
floodlight on one wall switch.
□
Suitable for eave mounting only.
□
Coverplate mounts to recessed mounted standard
junction boxes. Junction box must be at least
1-1/2 inch in depth for proper installation for
recessed mount application.
□
For best performance when installing more than
one Precision Plus Doppler Radar™ fixture:
□
Two or more units mounted side by side
(facing the same direction) should be at
least 17 feet apart.
□
Two units facing each other should be
mounted at least 100 feet apart.
REQUIRED ITEM (SOlD SEPaRaTEly):
□
Clear weatherproof silicone caulk
Pre-installation
Round
junction box
Octagonal
junction box
1-1/2 in.
1-1/2 in.
Doppler technology will detect motion
moving laterally or towards the detection zone.
Position for
eave mount
