8
Installation (continued)
3
Installing the mounting plate
NOTE:
Make sure there is enough vertical space above
NOTE:
Make sure there is enough space on the left and
right sides of the mounting plate to position and slide on
the light.
Place the mounting plate (AA) against the mounting
surface and ensure the mounting plate (AA) is level.
Mark the hole locations on the mounting surface,
through which the mounting screws (CC) will be
threaded.
□
If mounting to a wooden surface, drill two 3/32
in. holes into the mounting surface. Install the
two mounting screws (CC) through the mounting
plate (AA) and into the mounting surface.
□
If mounting to wall board or brick, drill two 7/32
in. holes into the mounting surface. Insert the
wall anchors (DD) and attach the mounting plate
(AA) using the two mounting screws (CC).
4
Mounting the light fixture
□
mounting plate (AA) from either the left or right
side. Make sure the sides of the mounting plate
□
using the mounting bolts (EE). Insert mounting
bolts (EE) through the left and right sides of the
light, and into the mounting plate (AA) in the
back.
AA
B
AA
B
EE
DD
AA
CC
