17
PHOENIX1
Audio Issues/No Audio
1. Ensure the volume is turned up on the monitor (press the V+ button to
increase volume)
2. Make sure that the sound is within microphone range
3. If the unit emits a loud screeching sound (feedback) try moving the
camera away from the monitor or angle the monitor differently
LCD monitor beeping and LEDs
lighting up frequently
1. The audio sensitivity is likely turned up all the way, making the
microphone very sensitive to sounds occurring in your monitoring area.
2. Adjust microphone sensitivity by using the
dial on the side of
the LCD monitor.
3. Pulling the dial down causes the camera to be less sensitive towards
sound and will only alert you in instances of very loud noises. Turning
the dial all the way down will completely disable the audio alarm.
LCD monitor not beeping despite
loud sound occurring in your
monitoring area
1. The audio sensitivity is likely turned down, or the alarm feature is
disabled.
2. Adjust microphone sensitivity by using the [Graphics: insert audio
sensitivity dial graphic] dial on the side of the LCD monitor.
3. Pushing the dial up causes the camera to become more sensitive to
sound and prone to more frequent alerts on the monitor.
Video/Audio not displaying on
TV screen
1. Ensure cables are plugged in their proper places: the RCA cables should
be in the TV’s input jacks and the adapter cable is in the AV out on the
side of the LCD monitor
2. Make sure the TV is on the VIDEO input channel
PHOENIX1
