PHOENIX1
13
PHOENIX1
AUTO MODE continued...
Use Auto mode if you want to be able to view video from both cameras and receive audio alerts if there are any sound
disturbances in either monitoring areas. To disable this alert, turn down the
(audio sensitivity) dial on the side
of the monitor by pushing the dial down all the way.
1. Press the A button. The monitor will display video and audio from your camera 2 monitoring location and the
Camera 2 indicator light will be on.
2. If you wish to view video from camera 1, press the A button again. You will see the Camera 1 indicator light turn
on and you will see video from camera 1 on your LCD screen. Otherwise the picture on the LCD screen and audio
on the monitor will switch back and forth from camera 1 to camera 2 every four seconds.
3. If the camera detects sound above the desired sound trigger level, the monitor will beep and will display video
and sound from your monitoring location. The Channel 1 or Channel 2 indicator light will also turn on to let you
know where your video is coming from.
