English
5
www.defa.com
NOTE!
If Link Hub (440030) and WarmUp Link (440036) are
already installed in the vehicle and GPS Link (440037) is to be
installed afterwards, then there is no need to use the wire harness
that follows with 440037. In this case the GPS module is plugged
into Link Hub and positioned as described in this manual before the
subscription is upgraded via the DEFA Link installer account.
The DEFA Link installer account is found on defa.com -> Log in ->
DEFA Link installer account.
INSTALLATION OF LINK HUB (440030) AND
GPS LINK (440037) NOTE!
Create a customer account, or
check that customer account is created before the installation of
Link Hub takes place. This to ensure that the customer has a Link
compatible phone, correct invoice address and has approved the
subscription conditions. (Create or check if the customer account
is established via DEFA Link installer account).
•
Place the Link Hub unit under the dashboard or in another
suitable place inside the compartment of the vehicle and
secure with cable ties.
•
GSM antenna (see fig.3.) must be placed as high and free
from obstruction as possible and not in the immediate
vicinity of metal, other electronic equipment or wires.
The positioning of the antenna will have a large part in
the quality of the GSM/GPRS signal strength.
Installation manual
Summary of Contents for GPS LINK
