deeper START, Manual

Page: 62 / 99

sonar frequencies. If you use a high sensitivity, the sonar display will show everything, including small baitfish and
floating debris in the water. When operating in very clear water or at greater depths, you should increase the
sensitivity, so you can see even weaker returns that may be of interest. Decreasing the sensitivity eliminates
clutter from the display, which can occur when the water is muddy. If the sensitivity is set too low, the display will
not show a lot of sonar returns that could be fish. We recommend starting from 100% sensitivity and then
gradually decreasing sensitivity until you get the best results. This setting is not available for Deeper START
Show fish icons – turn on/off special algorithms that interpret fishes and mark them with fish symbols on the
screen.
Fish size – When Fish Icons are enabled, allows you to choose which fish size to show (Large/Medium/Small). You
can choose which size to show by adjusting the slider. Selecting L/M/S will result in all 3 sizes being shown, L/M will
show only large and medium sized fishes, while L setting will show only large fishes. This feature will only work
if Fish icons are enabled.
Show depth – enables or disables depth readings that are displayed above or below fish icons. You can choose
the distance from surface to the fish (Fish icon with arrow up) or distance from the bottom to the fish (Fish icon
with arrow down). This feature will only work if Fish icons are enabled.
Fish alarm – enable fish alarms, that will make a sound alarm whenever a fish is detected. This feature will only
work if Fish icons are enabled.
Color palette – allows you to choose the most convenient color palette for viewing your sonar data based on the
environment, conditions and the time of day you are fishing. Alongside the Classic color palette, there are two
other options – Day and Night - which can be used for the best viewing of your sonar readings in either bright
sunny conditions (Day mode) or low light conditions (Night mode). This setting is not available for Deeper
START