deeper START Page 42 Manual Download | Manualshive

Page: 42 / 99

background image

Weight: 3.5oz / 100g
Size: 65mm / 2.5in in Diameter
Sonar Type: Dual Beam
Frequency (Beam cone): 290 kHz, 15° and 90 kHz, 55°
Depth Range Max/Min: Max 260ft / 80 m, Min 2ft / 0.5m
Sonar Scan rate: Up to 15 scans per second
Operating Temperature: -20°C to 40°C / -4°F to 104°F
Internal Battery: Lithium Polymer, 3.7V Rechargeable, 850mAh
Power Supply input: Micro USB B type, 5V DC, 450mA max
(for charging battery)
Power Adapter Input: AC 110V/240V. Output Micro USB, 5V 450mAh
Wireless connection type: Wi-Fi
GPS Positioning: L1 48 channel GPS receiver, high 3m@50% accuracy
Casting Range: Up to 330ft / 100m. Range depends on the OS and smartphone model
Battery Life: Up to 6 hours
Charging Time: 2 hours

Status bar

On the top right corner, you will find the Status Bar. Status Bar shows the most essential information from left to
right: status of your Deeper sonar, time, battery life and so on.

Current status of the Deeper Sonar – shows the current status of your Deeper sonar:

Sonar mode – Sonar scanning mode that is currently used.

Charging - Your sonar is plugged in to a power source and the battery is charging.

Connected - Your Deeper Sonar is successfully connected to your mobile device.

Not Connected - The connection between your Deeper Sonar and your mobile device has not been established or
was interrupted.

Out of water - Your sonar device is out of the water but is still connected to your mobile device.

GPS found – The GPS connection of your Deeper is accurate enough for bathymetric mapping. This status appears
only in On-shore GPS mode (PRO+ or CHIRP+ models).

Looking for GPS – The GPS connection of your Deeper is being established. This status appears only in On-shore
GPS mode (PRO+ or CHIRP+ models). Click here for the tips on how to increase the GPS connectivity.

Too shallow or too deep - Your sonar is unable to get an accurate depth reading. The most common cause of this is
that the water is too shallow or too deep. Deeper sonars have depth requirements for accurate scanning:

Deeper PRO, PRO+ - Narrow beam min depth 2ft / 0.5m; Wide beam min depth 4.3ft / 1.3m. Max depth (both
beams) 260ft / 80m

Deeper START - Min depth 4.3ft / 1.3m; Max depth 160ft / 50m
Deeper CHIRP models Min depth: 5.9 in / 0.15 m. Narrow CHIRP. 23.6 in / 0.6 m. Medium CHIRP. 31.4 in / 0.8 m.
Wide CHIRP. Max depth (all beams): 328 ft. / 100 meters

«
...
40
41
42
43
44
...
»

Summary of Contents for START




































































































Reviews:

No comments

Related manuals for START

DUAL BEAM 250DX

Brand: Humminbird Pages: 36

Brand: Garmin Pages: 10

Brand: Humminbird Pages: 66

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands