20181270 CR v8-2019Page 57
H: For better access to electrical and refrigerant connections and condensate discharge. The unit can be moved
10 cm away from the wall.
Notes: Schematic diagram
Notes for cooling/heating.
In cooling mode, with high relative humidity (80%), droplets of condensation may form at the air outlet of the
indoor unit.
In heating mode, the indoor unit fan starts up when the coil is warm to avoid blowing cool air.
During defrosting, the air conditioner will stop heating for approximately 5-12 minutes.
During defrosting, steam may be emitted from the outdoor unit. This is caused by defrosting, and is not a fault.
Emergency mode.
If the remote control is broken or the batteries are weak, press the button
If the indoor unit is OFF, the unit will switch to auto mode when the button is pressed.
If the indoor unit is ON, the unit will switch to OFF mode when the button is pressed.
Air direction.
Button
