DeDietrich IniControl, Installation, User And Service Manual, Page: 19 / 40

5.3.3. Status and sub-status
The information menu Q gives the following status and sub-status
numbers:
St status Sub-status Operation
0 Rest 0 Rest
1 Boiler start (Heat demand)
1 Anti-short cycle activated
2 Open isolating valve
3 Start-up of the boiler pump
4 Wait for the correct temperatures for burner start
2 Burner start
10 Open gas valve (External)
11 Fan start-up
12 Opening of the flue gas flue damper
13 Preventilation
14 Awaiting closure of the RL contact (if the function is activated)
15 Burner on switch request
16 Leak proofing system test
17 Pre-ignition
18 Ignition
19 Check flame presence
20 Inter-ignition time delay
3 Boiler on heating service
30 Nominal internal set point
31 Limited internal set point
32 Output control
33 Temperature protection gradient level 1 (Modulate down)
34 Temperature protection gradient level 2 (Part load)
35 Temperature protection gradient level 3 (Blockage)
36 Modulate up for flame control
37 Temperature stabilisation time
38 Cold start
5 Burner stop
40 Burner shutdown request
41 Post-ventilation
42 Fan speed reduction
43 Closure of the flue gas flue damper
44 Stop fan
45 Output restricted by flue gas temperature
6 Switching off the boiler
60 Post-operation time delay on the boiler pump
61 Stop boiler pump
62 Close isolating valve
63 Start anti short cycle
8 Control stop 0 Awaiting burner start-up
1 Anti-short cycle activated
9 Blocking XX Shutdown code XX
10 Lock out
11 Chimney-sweeping position: Low speed
12 Chimney-sweeping position: CH speed
13 Chimney-sweeping position: DHW speed
IniControl For C 330 / C 630 ECO 5. Commissioning
260216 - 7600717-001-06 18