45
CHANGING THE GAS SUPPLY
Note
The default settings on your hob are
for natural gas.
The injectors required for adapting the hob
to a butane/propane supply can be found in
the same plastic pocket as this guide.
•
Switching from natural gas to
butane/propane
During this operation,
BEFORE ANY CONNECTION IS
MADE
, you must complete the following steps:
➊
Turn the gas changing switch.
❷
Adapt the gas connection.
❸
Change the injectors.
➍
Connect to the electricity supply.
➊
Turn the gas changing switch.
Your appliance is supplied by butane/propane.
You must flip the gas changing switch on the
right front of your hob to the butane position
(Fig. 01).
❷
Adapt the gas connector
on the hob to
the new gas setting. Refer to the
“Connecting
to the gas supply”
section.
•
Switch
Natural gas
Butane/Propane
Gas
Fig. 01
EN
2 / INSTALLING YOUR APPLIANCE
Fig. 02
Burner cover
Grid
Head
Crucib
Summary of Contents for DTG 1138 Series
