22
•
6
ANOMALIES AND SOLUTIONS
•
5
CARE
REPLACING THE LIGHT BULB
Warning
Make sure the appliance is
disconnected from the power before
replacing the bulb in order to avoid
the risk of electric shock. Carry out
the operation when the appliance has
cooled
.
Bulb specification:
25 W, 220-240 V~, 300°C, G9.
You can replace the bulb yourself.
Unscrew the view port and remove the
bulb (use a rubber glove, which will make
it easier to remove). Insert the new bulb
and replace the view port.
- «AS» is displayed (Auto Stop system).
This function stops heating the oven if you
forget to switch it off. Turn your oven to
STOP.
- Default code starting with «F».
Your
oven has detected a problem.
Stop the oven for 30 minutes. If the fault is
still there, cut off the power supply for at least
one minute.
If the fault persists, contact the Customer
Service Department.
- The oven is not heating.
Check that the
oven is correctly connected and that your
installation’s fuse is not out of service. Check
that the oven is not set to «DEMO» mode
(see settings menu).
- The oven light is not working.
Replace
the bulb or the fuse.
Check that the oven is correctly connected.
- The cooling fan continues to operate
after the oven stops.
This is normal. It can
work for up to one hour after cooking to cool
down the oven. If it continues beyond this,
contact the Customer Service Department.
•
5
CARE
Summary of Contents for DOE7560X
Page 1: ...OVEN EN USER GUIDE...
