20
commercial scouring products.
Replace the liners when they get too dirty
with new liners and fix them to the shelf
runners before putting the shelf runners
back.
CLEANING THE INNER GLASS
To clean the inner glass, remove the
door. Before doing this, remove any
excess grease with a soft cloth and
washing up liquid.
Warning
Do not use scouring products,
abrasive sponges or metal scrapers to
clean the glass oven door as this
could scratch the surface and cause
the glass to shatter.
REMOVING AND PUTTING BACK THE
DOOR
Open the door fully and block it with one
of the plastic wedges provided in your
appliance’s plastic pouch.
Remove the clipped glass panel:
Using the other wedge (or a screwdriver),
press the slots
to unclip the glass.
A
EXTERNAL SURFACE
Use a window washing product applied
to a soft cloth. Do not use abrasive
creams or scouring sponges.
REMOVING THE SHELF RUNNERS
Side liners with shelf runners:
Lift the front part of the shelf runner
upwards. Press the entire shelf runner
and release the front hook from its
housing. Then, gently pull the whole of
the shelf runner towards you to release
the rear hooks from their housing. Pull
out the two shelf supports.
REPLACEMENT OF THE OVEN
CATALYTIC LINERS (
depending on
model)
This oven has a cavity with removable
liners which are slotted into the shelf
supports. These liners are covered with a
special micro-porous enamel (catalytic
enamel) with self-cleaning properties.
Dirt spreads out and is dispersed into the
micro-porous holes. It is oxidised on both
sides and gradually disappears.
We strongly recommend:
- That you do not scrub these catalytic
liners with metallic brushes, pointed or
sharp instruments.
- That you do not try to clean them with
•
5
CARE
Summary of Contents for DOE7560X
Page 1: ...OVEN EN USER GUIDE...
