PROG COOL sub-menu: Programming the cooling function
Tab.26 List of parameters
Parameters
Description
Factory setting
Customer setting
Timer program for Mondays
06:00 - 22:00
Timer program for Tuesdays
06:00 - 22:00
Timer program for Wednesdays
06:00 - 22:00
Timer program for Thursdays
06:00 - 22:00
Timer program for Fridays
06:00 - 22:00
Timer program for Saturdays
06:00 - 22:00
Timer program for Sundays
06:00 - 22:00
6.2 Setting the parameters
6.2.1 Modifying the User parameters
Caution
The name of the PCB is displayed. Check that it is actually the
PCB on which the setting must be made.
The parameters in the User menu can be modified by the user to meet his
central heating and domestic hot water comfort requirements.
Caution
Modification of the factory settings may impair operation of the ap
pliance.
1. Access the User menu.
2. Select the desired parameter by pressing or to scroll through
the list of parameters that can be adjusted.
3. Confirm the selection by pressing
.
4. Modify the value of the parameter by pressing or .
5. Confirm the new value of the parameter by pressing
.
6. Go back to the main display by pressing
h
.
6.2.2 Activating Forcing of the cooling function
Note
The cooling function can be managed via the PROG COOL sub-
menu dedicated to timer programming.
Note
The flow temperature set point for cooling mode corresponds to
parameters CP270 or CP280, depending on the type of circuit
configured (underfloor heating, convection fan). Parameters
CP270 or CP280 can be accessed from the User menu.
Fig.35 Displaying the User menu
MW-5000040-4
6 Settings
7611444 - v02 - 11122015
37
