3. Select the menu by pressing the or key until the desired sub-
menu is displayed. Confirm the selection by pressing the
key.
4. Go back to the main display by pressing the
h
key.
5.2 Start-up
1. Switch on the outdoor unit and the indoor module simultaneously.
2. The heat pump begins its start-up cycle.
If the start-up cycle runs normally, an automatic venting cycle is initi
ated. Otherwise, an error message is displayed.
5.3 Shutdown
5.3.1 Switching off the heating
Note
Heating mode can be managed via the TIME PROG sub-menu
dedicated to timer programming.
1. Confirm the shut-down mode by pressing the
key.
2. Select heating mode by pressing the key. Confirm by pressing the
key.
Fig.31 Displaying the sub-menu parameters
COUNTERS
MW-5000045-3
Fig.32 Selecting the shut-down mode
MW-5000027-3
Fig.33 Confirming the heating mode
MW-5000133-2
5 Operation
30
7611444 - v02 - 11122015