Dedicated Micros ©2007
SD Range
Unit Operation
The SD unit can be operated using the enclosed IR Remote Control, via the optional keyboard or
using a USB mouse.
Using the IR Remote Control
By default, the Keyboard/ Remote Control will be in “DVR” mode. If the unit does not respond to
commands from the Remote Control, pressing the “DVR” button will always return the Keyboard/
Remote Control to “DVR” mode. Pressing the “TV” button will switch to “TV” mode and send codes
understood by common television sets (when pre-programmed to do so; see Appendix B).
Pressing any of the coloured Softkeys at any time will display the ‘coloured’ keys first and then
access the equivalent ‘coloured’ option displayed in the menus.
For a description of the button commands available on the Keyboard/Remote Control, refer to the IR
Remote Control section (page 12).
Using the Optional touch keyboard
The unit can also be controlled using either the optional; DM/KBC1 or DM/KBC2 keyboard. This is
connected via the KBD connector on the rear of the SD and provides the same control functions as
the Keyboard/Remote Control.
DM/KBC1 Keyboard
