background image

Dedicated Micros ©2007

SD Range

This reminder is provided to call the CCTV system installer’s attention to Art. 820-40 of the NEC that 

provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be 

connected to the grounding system of the building, as close to the point of cable entry as practical.

CE Mark

If this product is marked with the CE symbol it indicates compliance with all applicable directives. 
Directive 89/336/EEC. 
A ‘Declaration of Conformity’ is held at Dedicated Micros Ltd., 
1200 Daresbury Park, Daresbury, Cheshire, WA4 4HS, UK.

Laser

The unit supports an integrated CD writer, the following are additional warnings associated with 

installing and operating the CD writer, please pay particular attention to this information.

•   Caution - Use of controls or adjustments or performance of procedures other than those 

specified herein may result in hazardous radiation exposure.

•   To prevent exposure to laser emanations (harmful to the eyes), do not attempt to 

disassemble this unit.

Summary of Contents for SD Range













































































Reviews: