Dedicated Micros ©2007
SD Range
Advanced
The Advanced button on the cameras page will access the Advanced settings page, allowing more
of the camera settings to be edited.
Camera
This column shows all the cameras that are currently connected
and can be edited.
Camera Type
The settings will default to Colour. If Monochrome cameras are
used, select Mono. This removes colour patterning when mono
cameras are displayed. If a particular channel is not in use, this
should be set to OFF. This will disable the camera fail on this
channel and also enable the record calculator to display the best
estimate of record duration.
Contrast Adjust
This option enables the contrast settings of the selected camera
to be changed. Select from 1 - 99 (default is 50).
Termination
The SD DVR will automatically terminate the camera input with
75Ω. This can be switched off here to enable a local monitor to be
tee’d off.
Camera (Red)
This button navigates back to the main Cameras page.
Cancel (Purple)
Settings are automatically saved when the page is closed. Use
this button to cancel any changes before navigating away from
the page.
More/Back (Blue)
Only eight cameras can be displayed on-screen. If required,
access additional camera settings via the More button. Return to
the previous page via the Back button. These buttons are only
displayed if more than eight cameras are connected.
Save
To ‘manually’ save changes whilst in a menu page, select the
Save button.
