Dedicated Micros ©2007
SD Range
• Outdoor Low.
• Very Low (lowest sensitivity level)
Display activity area
Use this option to test and tune the sensitivity and activity grid
configuration for each camera. When activity is detected on the
camera, a yellow box is displayed on-screen. Press the MODE
button to exit the test.
Remote Alarm Reporting
This must be enabled for the unit to automatically connect on
alarm, it must also be configured on the Alarm option. Ensure that
the Report settings have been configured in Alarms -> Remote
Reporting menu.
Email on activity
Enable this to send an email on receipt of an alarm. Ensure that
the email settings have been configured in Network-> Advanced->
Email settings.
Log event
The SD DVR can record all Events, both Alarms and Activity.
Enable this to have the event written to the log.
Switch to camera
The SD DVR can display the primary camera associated with this
alarm on the operator monitor.
Sounder
The unit has a buzzer which can sound for five seconds when an
alarm or activity are detected.
Edit grid (Red)
This button will open the Activity Grid editor for this camera (see
Activity Grid below).
Cancel (Purple)
Settings are automatically saved when the page is closed. Use
this button to cancel any changes before navigating away from
the page.
Save
To ‘manually’ save changes whilst in a menu page, select the
Save button.
