Dedicated Micros EcoSense Installation & Operation Manual Download Page 97

Page: 97 / 120

oSense

Dome Menu Option

The Dome Menu page allows camera specific menus imbedded on the currently viewed Telemetry

camera to be accessed and configured (if such menus are available).

Red

Dome Menu

Select to view camera specific sub-menus

embedded on the Telemetry camera (if

applicable). The camera specific menus will be

overlaid across the screen.

Green

Select

This option enables sub-menu content selection

(dependent on the protocol selected). Please

refer to the specific camera documentation for

further guidance.

Yellow

Return

This option enabes sub-menus to be exited

(dependent on the protocol selected). Please

refer to the specific camera documentation for

further guidance.

Blue

Menu Exit

This option will fully exit any embedded camera

sub-menus currently being viewed.

Purple

Back

Return to the previous page of the Viewer menu.

Summary of Contents for EcoSense

























































































































Search results

Summary of Contents for EcoSense

Reviews:

Dedicated Micros EcoSense, Installation & Operation Manual, Page: 97 / 120

Search results

Summary of Contents for EcoSense

Reviews: