manualshive.com logo in svg

Dedicated Micros EcoSense, Installation & Operation Manual, Page: 102 / 120

Share
Download
Dedicated Micros EcoSense Installation & Operation Manual Download Page 102

Dedicated Micros ©2009

10

Ec

oSense

Copy Menu

Images and events can be copied to CD/DVD or USB Media for remote reviewing away from the unit 

(for evidential or monitoring purposes). The Copy Menu can be accessed via the ‘Archive’ (Yellow) 

button on the Archive Selection page.

The Copy menu will display the Archive periods added to the Copy Event List. The Start and Finish 

date/times will be shown along with the estimated size of the download. 
Archive Media 

Select the media device (USB or CD/DVD) for archive purposes.

Include Viewer Application 

Select whether the application required to view archived data is 

included in the download. 

Used (Blue) 

Displays the space (as a percentage) already used on the chosen 

media device.

Required (Green) 

Displays the space (as a percentage) required to download the 

selected archive(s).

Free (White) 

Displays the space (as a percentage) that will remain following 

 

the download.

Status 

Displays messages relevant to the archive process i.e. ‘Archive 

 

In Progress’.

Progress 

Displays the progress of the current archive (as a percentage  

of completion).

Summary of Contents for EcoSense

























































































































Reviews:

No comments