Dedicated Micros EcoSense Installation & Operation Manual Download Page 21

Page: 21 / 120

oSense

Using the IR Remote Control

Press the MENU button to access configuration menus via a connected local monitor. The menu will

have a red indicator highlighting the first option. Select a main menu heading to open a drop down

list of further sub-options. Press the Down Directional button to highlight the next menu option, press

OK to open the highlighted menu.
Press the Right Directional button to highlight the first editable parameter on the screen.
Use the Left/Right/Up/Down Directional buttons to move between fields.
Select OK to start editing a field (the option will be outlined in green).
Use the Up/Down Directional buttons to change the settings within an editable field.
Use the OK button to accept a new setting. Use the coloured softkeys to select the accompanying

colour option on screen i.e. red button to select the red option. To undo changes made to any menu,

select the Refresh (Purple) option.

Note:

See below for information on entering alpha-numeric data.

Using the Front Panel Interface

The Configuration and Viewer menus can be navigated and edited using the unit’s front panel

interface (via a connected local monitor).
Navigate the menu tree via the Up/Down Directional buttons. When a menu is highlighted, open by

pressing the OK button.
Use the Left/Right/Up/Down Directional buttons to move between fields.
Select OK to start editing a field (the option will be outlined in green).
Use the Up/Down Directional buttons to change the settings within an editable field.
Use the OK button to accept a new setting.
Use the colour bar (Red, Green, Yellow, Blue and Purple) to directly access the

corresponding function displayed on the menu screen i.e. red panel to select the red option.

Note:

See below for information on entering alpha-numeric data.

Entering Alpha-Numeric Data via a Local Monitor

Numeric or text data is entered using the on-screen Virtual Keyboard (Arrow Key Editor).
To display the Virtual Keyboard, navigate to the relevant text input box using the Directional buttons

and double press the OK button twice on the IR Remote Control or Front Panel Interface. The Virtual

Keyboard is displayed.
Use the Directional buttons to move between characters, use the OK button to select a character.

Select ‘Submit’ to enter details, press ‘Cancel’ to exit without entering any text.
Alpha-numeric data can also be entered in either upper or lower case format by ‘multi-tapping’

a relevant button. For example, with the cursor located in the text entry window of the Virtual

Keyboard, repeatedly tap button ‘2’ to cycle through the following characters: 2,A,a,B,b,C,c,2 etc.
To select one of these characters, simply stop tapping the button when the chosen character is

displayed. The cursor will then progress, ready for the next character entry.

Note:

A USB Keyboard (not supplied) can be connected via one of the USB ports on the unit. The

USB Keyboard can then be used to enter alpha-numeric data via the local menus.