Dedicated Micros EcoSense Installation & Operation Manual Download Page 116

Page: 116 / 120

oSense

EVENT COPYING

Event sequences and user defined recorded sequences can be saved to a disc via the integrated CD/DVD-writer or to

an external flash drive through the USB port.

NETWORKING CAPABILITIES

A standard Ethernet connection allows live and recorded viewing on a networked PC using DM’s NetVu ObserVer

software. Webpages are available for configuration and live viewing using a standard web browser

KEYBOARD/RC INTERFACE CONTROL

Offering full system control.

OPTIONAL KEYBOARDS

Supports Dedicated Micros keyboards:
DMKBC1
DMKBC2

TELEMETRY

Built-in RS485/Twisted pair protocols provide direct control of the numerous domes including but not limited to the

following:

•   Dedicated Micros Serial
•  AD Matrix/AD 168-Matrix
•   Baxall C
•   BBV C/RS485/Matrix
•  Dennard/Dennard C
•  Ernitec
•  JVC

• Kalatel
• MarkMercer

•  Panasonic WV-CS600/WV-CS850
•   Pelco C
•  Philips/Philips 232
•   Samsung
•   Sanyo
•   Sensormatic

• Ultrak

•  Vantage
•  VCL/VCL-Matrix
•  Vicon
•  Vista

RESOLUTION

QCIF, CIF, 2CIF,4CIF, D1

COMPRESSION

JPEG & MPEG-4 format files.
User definable file size and bit rate.

ECOSENSE RANGE DATA

Serial Ports: 1 x RS232 and 1 x RS232.
Ethernet: 1x Ethernet RJ-45 10/100 Ethernet connection.
USB: 3 x USB 2.0 Connector (1 positioned on the front panel).

TEMPERATURE RANGE

5 - 40°C

RELATIVE HUMIDITY

10% - 85% Non-condensing.

UNIT DIMENSIONS

435mm deep, 440mm wide, 98mm high.

Summary of Contents for EcoSense

























































































































Search results

Summary of Contents for EcoSense

Reviews:

Dedicated Micros EcoSense, Installation & Operation Manual, Page: 116 / 120

Search results

Summary of Contents for EcoSense

Reviews: