Dedicated Micros DV-IP RT Installation And Operation Manual Download Page 89

Page: 89 / 148

V-IP RT

Live Transmissions

The unit transmits live images using JPEG or MPEG formats.

The NetVu Connected remote viewing software will use the settings configured on this page as the

defaults for JPEG & MPEG; High, Medium and Low settings.

High LAN/Medium WAN/Low VLBR This shows the transmission settings configured for a High quality

LAN (Local Area Network) connection, Medium quality WAN

(Wide Area Network) connection or a Low quality VLBR (Very Low

Bit Rate connection).

Comp

Settings can be established for JPEG and MPEG compression.

Res

For MPEG and JPEG transmission, select image resolution

settings (4CIF, 2CIF, CIF or QCIF).

Size_rate

For JPEG, the figure entered will be the size of the JPEG

transmitted (in Kbytes). For MPEG4 the figure will be the bit rate

allocated. A higher rate will provide better quality picture display.

JPEG file sizes can be configured in the range of 5-45Kbytes and

MPEG bit rates in the range of 45-2500Kbits/second.

This shows the number of pictures transmitted per millisecond.

For JPEG, the actual images transmitted will depend on the

bandwith of the link, increasing the pictures sent per millisecond

may introduce time lag if bandwith is not sufficient. On MPEG

transmission, increasing the pictures sent will also reduce the

quality of the images (as more images are transmitted for the

defined bit rate).

Intelligent Security & Fire Ltd

Summary of Contents for DV-IP RT





















































































































































Search results

Summary of Contents for DV-IP RT

Reviews:

Related manuals for DV-IP RT

Brands by name

Popular brands

Dedicated Micros DV-IP RT, Installation And Operation Manual

Search results

Summary of Contents for DV-IP RT

Reviews:

Related manuals for DV-IP RT

Brands by name

Popular brands