Dedicated Micros ©2008
1
SDH36
Setting up Presets
Up to 16 Preset positions may be set up using the controller programming facility when PTZ control
is over coax. If more than 16 preset positions are required, the Dedicated Micros SDH36/N dome
programming must be used via the dome’s on-screen menus. Alternatively RS485 PTZ control
should be used if more than 16 presets are to be recalled directly form the controller keyboard. Up
to 200 positions can be stored and recalled at any time. Each position stores the Pan, Tilt, Zoom,
and Focus positions as well as the position title. Each preset position can have a title of up to 20
alphanumeric characters assigned to it to identify the associated position uniquely.
It is possible to control the Dedicated Micros SDH36/N dome from a wide range of controller
devices. Always refer to the controller manual to identify the correct operating procedures. The
buttons used by the most popular controllers to access the Dedicated Micros SDH36/N menu
system are shown in the DM Operation and Programming manual.
