Dedicated Micros ©2008
1
SDH36
Control Configuration
Accessing Switches
To access the address switches and the RS485 termination switch, remove the outer hemisphere as
shown above. The location of the switches is also shown. This operation should be carried out in an
office type environment to avoid ingress of moist air.
Switch Configuration
The same address switches are used for both RS485 and up the coax control,
Refer to the individual
configuration chapters for more information
.
Note:
When reassembling the dome, check the hemisphere sealing gasket is in place and that the
hemisphere retaining screws are retightened to avoid water ingress.
