DECstation 5000/260, Operator'S Manual, Page: 89 / 215

6.3 Operating the Ethernet Connector Sliding Lock
To operate the sliding lock mechanism, follow these directions:
1. To unlock the sliding lock on the system unit Ethernet connector or on
a ThickWire Ethernet cable, slide the lock in the direction of the small,
u-shaped notch. (On the system unit, push the lock to the right with a
flat-blade screwdriver. On the cable, push the lock either left or right
toward the small notch, depending on the way the lock is mounted.)
Figure 6–2 Unlocking the Ethernet sliding lock
WS3PO095
Small notch
Large notch
0
PMAG-C
1
2
Sliding lock on the base system
ThickWire Ethernet connector
3
2
6–4 Optional Network Connections