DECstation 5000/260, Operator'S Manual, Page: 72 / 215

5.4 Installing External Storage Devices
9. Attach the larger connector on the system-unit-to-expansion-box cable to
one of the SCSI connectors on an expansion box.
Do not connect this cable to a TCE, if you have one. Skip the TCE and
connect the system-unit-to-expansion-box cable to the next box. (The TCE
requires a different type of cable and must be connected last.)
Figure 5–5 Connecting the system-unit-to-expansion-box cable to expansion
box
Wire bracket
WS3PO099
Groove
1. Gently press the two wire brackets on
the SCSI connector away from
the connector.
3. Press the two wire brackets
firmly against the sides of
the cable connector until
they lock into the grooves
on the connector.
2. Hold the cable connector
so the widest part is on
the top and push the
cable connector into the
SCSI connector as far
as it will go.
Expansion box
5–8 External Storage Devices