DECstation 5000/260, Operator'S Manual, Page: 34 / 215

The Main Components and How to Install Them
1.2 The Monitor
2. Plug the appropriate end of the monitor-to-system-unit power cable into
the power connector on the back of the monitor.
Plug the other end into the monitor-to-system-unit power connector on the
back of the system unit.
Figure 1–16 Connecting the monitor-to-system-unit power cable
Monitor-to-system-unit
power connector
Monitor-to-system-unit
power cable
WS3PO070
B
G
R
Monitor power
connector
3. Check to make sure that the power to the system unit is off. Then set the
monitor power switch to the on position; see Section 1.2.1.
1–20 The Main Components and How to Install Them