DeCrane Aerospace Audio International
DVD-5x2-01-x Installation & Operation Manual
Document # 540356, Rev C, 12/2008
Page 7 of 38
3.0
Installation
3.1
Preparation
3.1.1
Careful consideration of the location of this and all other
audio/visual modules is necessary. Some of the items to be
considered in the design and layout of the aircraft cabin include:
•
Space
•
Available power supply
•
Environmental conditions (temperature, humidity, etc.)
•
Length of cable runs
•
Location of other aircraft systems (oxygen delivery)
3.1.2 The DVD-5x2-01-x shall
be installed to conform to the standards
designated by the customer, installing agency, and existing
conditions as to the unit location and type of installation.
3.1.3 Mounting screws are required to secure the unit. Mounting points
will vary depending on the kit used. Refer to Section 6.0, Reference
Drawings, for mounting hole diameters and configurations.
3.1.4 All headphone amplifiers and line level amplifiers should be located
no more than three (3) feet away from source equipment. Long
low-level audio runs may introduce noise into the audio signal.
3.1.5 The installing agency shall supply and fabricate all external cables
to the DVD-5x2-01-x. The length and routing of external cables
shall be carefully studied and planned before attempting installation
of the unit. Allow adequate space for installation of cable and
connectors. Mating connectors are the responsibility of the
installing agency. Correct pin assignments as outlined in Section
3.9 are the responsibility of the installing agency.
3.2
Unpacking and Inspection
3.2.1 Carefully open the packaging and remove the DVD-5x2-01-x. Verify
that all components have been included in the package per the
packing list. Inspect the unit for shipping damage.
3.2.2 If damage has occurred during shipping, a claim should be filed
with DeCrane Aerospace Audio International WITHIN 24 hours and
a
Return Request Authorization Number
shall be obtained from
DeCrane Aerospace Audio International by contacting the Repair
Department at 501-801-8101. Repackage the unit in its original
packaging materials and return it to DeCrane Aerospace Audio
International following instructions given by the DeCrane
Aerospace Audio International representative. Refer to the front
