DeCrane Aerospace Audio International
DVD-5x2-01-x Installation & Operation Manual
Document # 540356, Rev C, 12/2008
Page 15 of 38
if the DVD has a sticker, it should be loaded with the sticker facing
up!
Gently push the DVD into the slot.
The disc should begin loading, which will be indicated on the monitor
screen. If the disc does not start playing automatically after it has loaded,
then use the DVD Player’s front panel buttons or the handheld remote
control unit to select
PLAY
. DVD material should appear on the
appropriate monitor. This material is usually a menu, but this may vary,
depending on individual DVD configuration. For CDs, the tracks should be
listed on the side of the screen. Audio should channel through the
speaker/headphone system.
If sound cannot be immediately heard through speakers or headphones, it
may be that the volume is too low and should be increased appropriately.
Note that there are no audio controls on the DVD-5x2-01-x. Any desired
adjustments must be performed through other audio distribution devices.
If power is interrupted (>200 msec) or power drops below +18 VDC while
a disc is playing, the player may shut down. If a DVD disc is in the player,
the unit will begin playback from the beginning of the disc automatically.
4.0
Operation
4.1
Front Panel Controls
