DeCrane Aerospace Audio International
DVD-5x2-01-x Installation & Operation Manual
Document # 540356, Rev C, 12/2008
Page 17 of 38
functionally dependent on the current mode of the DVD Player, and the
media type played.
Pressing and holding the Forward Button once will place the DVD Player
in Fast Forward x8 Mode with no audio output. Play will resume when the
Forward Button is released.
The Forward Button is active when the DVD Player is powered on and not
in Standby Mode. If the Forward Button is pressed while the unit is in
Standby Mode, the unit will power up, then press the Forward Button
again and the unit will respond.
EJECT BUTTON
The Eject Button allows the user to access the disc. After pressing the
Eject Button it is then possible to retrieve the disc from the DVD Player.
Note that the disc will slide out on its own. It is not necessary to force the
disc to eject from the DVD Player.
The Eject Button is active when the DVD Player is powered on and not in
Standby Mode. If the Eject Button is pressed while the unit is in Standby
Mode, the unit will power up, then press the Eject Button again and the
DVD or CD will respond.
STOP BUTTON
Press the Stop Button once during playback to place the DVD Player in
Hold Mode. The stops playback and causes a blue screen to be
displayed. Pressing the Play Button at this point will resume playback from
the Held point.
The Stop Button is active when the DVD Player is powered on and not in
Standby Mode. If the Stop Button is pressed while the unit is in Standby
Mode, the unit will power up, then press the Stop Button again and the
DVD or CD will respond.
PLAY BUTTON
The Play Button allows the user to begin or resume normal Playback
when the DVD Player is in the following modes: Stop, Pause, Forward,
and Rewind.
