deconta decontamination mobile D 3000, Manual Book

Page: 6 / 52

Guide book
D 3000 / 4000 / 5000
Seite 6
1.4 Wheels, tyres and wheel replacement

Check regularly the steady wear tread, the tread depth and the external damages
of the tyres. Please observe the minimal tread depth officially required.

Use only authorized tyres in accordance with the wheel rim type (see registration
certificate).

Use always tyres of the same construction, the same make and same version
(Summer- or winter tyres).
Tighten the wheel nut cross wise,
Tightening torsional moment 90 – 110 Nm.
Check again after first journey (after approx. 100 km).

Check the pressure of the cold trailer tyres regularly before the journey.
Tyres Pressure in bar
195 / 50 B 10 6,0
The statement of the value of the tyre pressure applies to the cold tyres. The trailer is steadily adapted to the newest
technical standard. It is possible that new tyres sizes are not considered in this chart. In this case,
deconta provides
you the newest values.
Wheel change:

The trailer must stay on an even, firm and slip-free soil.

For the wheel change, please use the supplied car jack.

Before lifting the trailer, the hand brake has to be applied tightly.

Ensure that the trailer cannot roll away using wheel chocks placed on the opposite
side.

Do not ever lift the vehicle with the attached landing gear

Fix the car jack only in the provided and marked place.

Do not lay down under the lifted trailer

If you use wheel rims or tyres which are not allowed for the trailer, the road traffic
security can be affected.