- 14 -
5.2.4.
Step 4:
Put the handle bar base (upper part) (C) in the handle bar base (lower part)
(D).
Be sure that you slide first the sensor cable carefully through the handle bar
base (upper part) (C). Do not pull on the cable.
The positions of the holes in both handle bars (C and D) must be aligned with
each other on the front side of the Stepper Machine. The height of the handle
bar base can me adjusted with the big round knob from 41.5” to 45.5”
(1054mm to 1156mm).
Loose the knob, pull the knob out and move the pin of the knob in one of the
holes to adjust the height. With this feature you can adjustment the handle
bars, allowing users to cater to their specific height and for the machine to be
used by multiple people.
