- 13 -
5.2.3.
Step 3:
It is time to fix the handle bar base (lower part) (D) on the flange (F). For this
step you need the wrench (M), 5 small bolts (K) and 4 curved spring washers
(J). There are 5 holes to fill up with the screws.
Warning:
Be sure that the curved washers are mounted correctly. The curves of the
washers need to follow the curve of the tube.
Left picture: The washers are incorrect mounted.
Right picture: The washers are correct mounted.
Use J+K for the left hole.
Use J+K for the right hole.
Use K for the front hole.
Use J+K for both holes on the backside.
Use the wrench to
tighten the small
bolts.
J+K
J+K
K
J+K
