- 11 -
After unpacking the unit, open the small plastic bag and make sure that you have all
the fasteners. You should have 6 curved spring washers (J), 6 short bolts (K) and 2
long bolts (L).
5.2.
Assembly steps:
5.2.1.
Step 1:
You can find the main base (A) completely assembled when you open the box.
The sensor cable is already attached on the main base. Be sure not do
damage this cable.
Put the main base (A) on the floor. Do not put the heavy main base on the
sensor cable because this can damage the cable.
Slide first the sensor cable carefully through the flange. Do not pull on the
cable.
Put the flange (F) for fixing the main base on the handle bar base in the tube
of the main base (A). The positions of the holes in the flange need to be in the
same position as the holes in the tube on the main base.
