DECKED.COM
|
#DECKEDUSA
|
@DECKEDUSA
MT5 / MT7 | v.1.1 |
Page 6
PREP BED:
TAILGATE BRACKET
(FOR TACOMAS WITH NO DRIVER SIDE TAILGATE CUBBY)
NOTE:
Disregard this page if you
HAVE
a driver's side tailgate cubby.
• Referencing dimensional info in
DETAIL A
mark hole locations and drill (2) 5/16" holes (with drill stop set at .62").
• Referencing
DETAIL A
install J-hook mounting bracket as shown with bolts, backing plate and nuts.
Tighten bolts securely.
BAG
PREP-MT7
,
BAG
TACOMA TD
.
DETAIL A
DRIVER'S SIDE ONLY
HOLE DRILLING
DETAIL A
DRIVER'S SIDE ONLY
BOLT INSTALLATION
DRILL 5/16" HOLE 2 PLACES
DRILL STOP
5/16" DRILL BIT
.62"
2.75"
7.5" TO
BOTTOM
OF BED
5.75" FROM
REAR OF BED
BOLT
BACKING
PLATE
NUT
DETAIL A
RECOMMENDED TORQUE:
Bolts in labeled bag PREP-MT7 - 53 in-lb.
