DECKED.COM
|
#DECKEDUSA
|
@DECKEDUSA
MT5 / MT7 | v.1.1 |
Page 11
INSTALL:
CABSIDE BRACKET DRILL
• Place driver side cabside bracket flush against truck bed wall, now tighten securely to stud bracket.
• While keeping assembly on centerline, drill three 1/4" diameter holes into bed using cabside bracket as a guide
(green holes). Make sure to use a drill stop set to 1/2" depth.
• Repeat passenger side.
A
DETAIL A
1/4” DRILL BIT
DRILL STOP
1/2”
DRILL HOLES
(GREEN)
MAKE SURE CABSIDE BRACKET
(GREY) IS FLUSH AGAINST BED
➡
CAB
CAB
➡
RECOMMENDED TORQUE:
53 in-lb.
