SVR DU
AL
™
U
ser
’s M
anual
9
3.4 Mounting Configuration
The SVR Dual™ comes equipped with four mounting holes on the
reverse side (See Figure 3 .4) . Use these holes only to mount the
SVR Dual™ .
Figure 3.4
Arrows indicatie mounting hole locations .
.
The unit can be mounted in a variety of ways using a horizontal or
vertical pipe . The mounting bracket can be attached to the top or
the rear of the unit . The bracket of the unit is then attached to a pipe
using high strength 1/2 inch wide stainless steel adjustable hoops .
3.5 Mounting Examples
The following examples show standard mounting and positioning of
the SVR Dual™ . It is important to make sure that the unit is
parallel
with the surface of the water . If need, a level can be placed on the
unit to insure level . In the examples below, a standard pole is used .
Figure 3.5b
Figure 3.5a
SVR parallel to water surface
